Racing genes for the track and the open road
The S-R7 Solid is a full-face motorcycle helmet that Alpinestars developed for two worlds: the track day and the sporty ride on the open road. Its shape comes from the wind tunnel, with an integrated spoiler and side fins that keep the motorcycle helmet stable when you tuck in behind your fairing at high speed. Beneath that streamlined exterior lies a composite shell with carbon and aramid. This gives you racing technology in a full-face motorcycle helmet that you can also wear on an ordinary Sunday ride.
For sports riders who also head to the track
The S-R7 Solid is aimed at riders with a sports bike or a sporty naked bike who enjoy fast rides on the open road as well as the occasional track day. Thanks to its extensive ventilation and adjustable lining, it is also suitable for sporty touring. The wide field of vision, 220 degrees horizontally and 57 degrees vertically, helps you look far ahead through the corner, even in a forward-leaning riding position.
Composite with carbon and aramid, three shell sizes, 1390 grams
Alpinestars builds the helmet shell from fibreglass, reinforced with carbon and aramid. These layers are pre-impregnated with epoxy resin, resulting in a strong and relatively light helmet shell.
With three different helmet shell sizes across the full size range, the full-face motorcycle helmet stays in proportion to your head in every size. In size M, it weighs 1390 grams.
What lies beneath the helmet shell
Inside, there is a seven-piece, shock-absorbing EPS liner in six densities, tailored to each helmet size. A smooth coating on this EPS liner is designed to limit the rotational movement of your head in an oblique impact. At collarbone level, PLASMA inserts absorb the impact when the lower edge of the full-face motorcycle helmet presses against your shoulder in a slide.
Visor
- The visor has optical class 1 and a scratch-resistant coating on both sides.
- The visor increases in thickness from 1.6 mm at the sides to 2.6 mm in the centre.
- A Pinlock 120XLT MaxVision is included as standard.
- A lock with a metal hook keeps the visor closed, even in a fall.
- You change the visor without tools, and a mechanism at the sides presses the visor all the way round against the rubber seal.
- There is no integrated sun visor. A tinted visor is available separately.
- The visor is prepared for tear-offs for use on the track.
Ventilation: ten vents
The S-R7 Solid has six air intakes and four outlets. Three air intakes are located in the chin guard and direct air along the inside of the visor, which prevents fogging. You close the central chin intake with a removable rubber plug. At the top, a slider opens three air channels around your head. Two outlets in the chin guard and two in the rear spoiler expel warm, humid air.
Lining and comfort
The A-Head system lets you adjust the height, depth and angle of the full-face motorcycle helmet on your head. This ensures it sits exactly right in your riding position. The entire lining is removable, washable and treated with an antibacterial finish. The cheek pads feature cut-outs for glasses and a channel for a hydration tube. A nose guard and a chin curtain are part of the package, as is a protective helmet bag.
Communication and connectivity
The S-R7 Solid is prepared for a helmet-specific communication system. This system fits neatly into the lining without compromising the fit or the aerodynamics.
Fastening
The S-R7 Solid closes with a double D-ring fastener. This is the classic, reliable fastener that you also find (as a requirement) on the track. It takes a little getting used to if you have been using a Microlock all your life, but once fastened, it is extremely secure.
The cheek pads feature an emergency release system, allowing emergency services to remove the full-face motorcycle helmet from your head more safely after a crash.
Certification
The S-R7 Solid is approved to ECE 22.06, the European standard for motorcycle helmets. According to Alpinestars, the full-face motorcycle helmet performs 80 per cent better than ECE 22.06 requires in the rotational impact test.
Our RAD specialist's opinion
The S-R7 Solid brings technology that you used to find only in the most expensive racing helmets to a far more accessible price range. A composite helmet with carbon and aramid, three helmet shell sizes, an adjustable lining, a Pinlock in the box and PLASMA inserts for your collarbones: you do not often see all of that together in this segment.
Is that too much of a good thing? Good protection for your head is never ‘too much’. Of course, choosing a full-face motorcycle helmet is a deliberate choice not to opt for a modular motorcycle helmet, and if you are looking for an integrated sun visor, you will also have to look elsewhere. It is no coincidence that both come at the expense of a snug fit, noise levels, compactness and weight. For the sporty rider who wants one motorcycle helmet for both the road and the occasional track day, this is one of the strongest choices in this price range.
Reflective stickers and maintenance
In some countries (such as France), it is mandatory to fit reflective stickers to your motorcycle helmet. The S-R7 Solid is supplied without these reflective stickers. You can find reflective sticker sets here.
Maintenance tips:
- Does the thought of removing your helmet's lining to wash it put you off? You can also clean the lining without removing it, using S100 Helmet Interior Cleaner.
- The outside of your helmet and the visor are best cleaned with S100 Helmet and Visor Cleaner.
Safety first!
Never ride with a scratched or dull visor. Especially at night, scratches cause blinding reflections from street lighting and the headlights of oncoming traffic. In wet weather, this effect is even more pronounced. It is best to replace a worn visor as soon as possible. Planning a long trip? Then be sure to bring a spare visor. Never ride in the dark with a tinted visor.



