The Moto Mirror Bundle LT Universal effectively 'bundles' two SP Connect elements, saving you a bit of puzzling and searching.
This particular bundle consists of a Mirror Mount with three diameter adapters and a StandTool, and a Universal Interface. With these you've got just about everything you could possibly need to safely and quickly install your smartphone on your motorcycle's mirror and use it as a navigation device.
The Mirror Mount is a clamp that attaches to the mirror of the motorcycle or scooter. Your apps, navigation or playlists are immediately within reach. And if you don't use the Mirror Mount, it's barely noticeable. Your smartphone can rotate 360° on the rotating head.
Motorcycle mirror stems - or other narrow tubes - with a diameter of 10 to 16 millimetres are eligible to support the SP Connect Mirror Mount.
The self-adhesive Universal Interface attaches directly to your smartphone or its case, or on your power bank, loudspeaker, or even on your notebook. You can basically use it to attach anything to any SP Connect Mount.
The method is always the same: the patented twist-to-lock mechanism (turn the phone a quarter of a turn and you're done) is simple, quick and firm. Bikes, cars, motorcycles, running armbands, golf trolleys, strollers, there are really no limits to its versatility.
The Universal Interface features a 3M™ sticker and measures 66 x 55mm. Once attached the mechanism is unobtrusive and non-disruptive.
Note about the adhesive bit: there is 'sticking' and 'sticking' of course. The 3M material lends itself perfectly to most smooth surfaces, so adhering to plastic, glass and metal shouldn't be no problem at all. Not even with a coat of paint.
Check if you have a 55 x 65 mm sized surface available, clean and degrease it beforehand and press firmly on the interface after mounting (about 30 seconds). Trying again is not an option: you need to think and be careful beforehand. Once it is adhered you can rest assured.
If you attach the SP Connect a little too carelessly, you may find that your smartphone does not attach, even though the SP Connect attachment system has changed position. Before you tackle the problem with a screwdriver, get out the reset key. It's exactly the same as the StandTool attachment and will easily turn the system back to a working position.
Please note! Because certain smartphone models have a very weak suspension of their internal camera, SP Connect™ recommends mounting their ANTI VIBRATION MODULE! An adapter is required to use it with this mount.
SP Connect™ is in no way responsible for any damage to the smartphone!
