KEITI Moulded wheel stickers Fluorescent green

Make your bike stand out with these MotoGP style rim decals.

The rim decals consist of 3 parts per wheel side, 12 parts per set, enough for both wheels on both sides. The decals are 7mm wide, and each part is 40cm long. Every part features an ever decreasing set of reflective blocks. These rim decals fit 17 inch wheels with a rim edge width of 7mm or more.
The strips are easy to apply to the edge of the wheel and stay on due to a strong adhesive tape.

Installation guide:

• Cleaning
  • Clean rims thoroughly
  • Degrease
  • Completely dry, if necessary blow dry with air.
• Pre-treatment
  • Wet the rim evenly. This allows you to reposition the decals for a short while after application.
• Adhere
  • Make sure there is enough light to work in, and that you have a soft, lint-free cloth ready. Check again if there is enough water on the rim. Otherwise the rim decal will stick immediately, after which it can no longer be repositioned.
  • Removing the decal from the rim
  • Place the decal on the rim. It may be that the curve of the decal does not completely match the curve of the rim. However, you can easily adjust the decal.
  • After applying the decal, press on it firmly with a dust-free cloth, forcing the water away from under the decal. After a short while (depending on the amount of water remaining) the decal will be adhered.
  • Remove the application tape.

Precautions:

• Do not apply the decals on top of each other, this to prevent rolling up, loosening etc.
• After 3 days the decals will be adhered strongly enough to allow the motorcycle to be washed again.
• Do not use corrosive detergents, only detergents intended for synthetic materials.
• Do not use high-pressure water jets on the rim decals to avoid damage and peeling.