Hello, we are busy dotting the i's and crossing the t's on the English description of each product. In the meantime, we are already giving you the automatic translation. Thank you for your understanding. Should you have any questions regarding this product, please contact us at email@example.com.
With this red lacquer you can accentuate the brake callipers of your motorcycle for an individual look. The paint has good filling properties, good corrosion protection and a lasting gloss. The paint is scratch and impact resistant, resistant to petrol, chemicals and weather influences and reduces the adhesion of dirt.
Instructions for use
Before use, read and follow the instructions on the packaging carefully.
The surface must be clean, dry and grease-free. Remove loose old paint and rust, then sand and prime with MoTip white primer. Lightly sand the primer after drying (600-grit paper).
Bring the spray can to room temperature. The ideal processing temperature is 15 to 25°C. Shake the aerosol for two minutes before use and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetres.
Apply the lacquer in several thin layers. Before applying the next layer, shake the aerosol again. After use, clean the valve (spray can upside down and keep the spray head pressed for about 5 seconds). The drying time depends on the ambient temperature, humidity and the applied layer thickness.